Column Lifter
Lifting > Separating > Transfer
Whether with toothed belt or pneumatic drive, the universal lifter is always used when conventional lifters are too slow or the conveyor section has a too low overall height. The mounting plates allow a variety of attachments, from a support fork, to angle rails, to attached roller, string or belt conveyors, almost anything is possible. Using the example of a feed line, the lifter can be used to lift a goods carrier onto the return or to separate conveyed goods. Furthermore, the transfer from an AGV to a conveyor line is possible.
Suitable for:
- Roller, strand or belt conveyors
- Pallets or racks
- And much more…
The advantages at a glance
- Robust lifter for loads up to 1.5 t
- Exact running and precise guidance
- Drive by toothed belt, chain or pneumatic cylinder
- Base frame can be exactly levelled and dowelled to the floor using four M30 x 1.5 banjo bolts
- Robust welded construction for vertical liftingLoad absorption via mounting plates or optionally with support fork made of square tube or angle rail
- Durable and low-maintenance due to high-quality components and clever maintenance options
- Optional: mechanical / electronic safety devices, servo drives, locating pins, sensors, absolute encoders, incremental encoders and much more!
- Special designs available on request
Specifications
The following guide values apply to standard conveyors, in internal ambient conditions and for defined applications and goods conveyed.
| Payload | 150 kg | 500 kg | 1.500 kg |
| Hub | from 500 mm | from 5.500 mm | from 5.500 mm |
| Speed max. | – | 6 m / min. | 6 m / min. |
| Lifting actuator | Pneumatic | Timing belt | Timing belt |
| Timing belt | – | 50 mm | 85 mm |
| Input power | – | 1,1 kW | 4 kW |
| Threaded plates | 3 x M16 | 3 x M16 | 3 x M24 |
| Load centre | up to 800 mm | up to 800 mm | up to 800 mm |
| Energy Chain | 21 x 38 mm (inner half-mast) | 21 x 38 mm (inner half-mast) | 21 x 38 mm (inner half-mast) |
Application examples
